Was ist Segregated Witness? - BTC-ECHO News zu Bitcoin ...

Bitcoin (BTC)A Peer-to-Peer Electronic Cash System.

Bitcoin (BTC)A Peer-to-Peer Electronic Cash System.
  • Bitcoin (BTC) is a peer-to-peer cryptocurrency that aims to function as a means of exchange that is independent of any central authority. BTC can be transferred electronically in a secure, verifiable, and immutable way.
  • Launched in 2009, BTC is the first virtual currency to solve the double-spending issue by timestamping transactions before broadcasting them to all of the nodes in the Bitcoin network. The Bitcoin Protocol offered a solution to the Byzantine Generals’ Problem with a blockchain network structure, a notion first created by Stuart Haber and W. Scott Stornetta in 1991.
  • Bitcoin’s whitepaper was published pseudonymously in 2008 by an individual, or a group, with the pseudonym “Satoshi Nakamoto”, whose underlying identity has still not been verified.
  • The Bitcoin protocol uses an SHA-256d-based Proof-of-Work (PoW) algorithm to reach network consensus. Its network has a target block time of 10 minutes and a maximum supply of 21 million tokens, with a decaying token emission rate. To prevent fluctuation of the block time, the network’s block difficulty is re-adjusted through an algorithm based on the past 2016 block times.
  • With a block size limit capped at 1 megabyte, the Bitcoin Protocol has supported both the Lightning Network, a second-layer infrastructure for payment channels, and Segregated Witness, a soft-fork to increase the number of transactions on a block, as solutions to network scalability.

https://preview.redd.it/s2gmpmeze3151.png?width=256&format=png&auto=webp&s=9759910dd3c4a15b83f55b827d1899fb2fdd3de1

1. What is Bitcoin (BTC)?

  • Bitcoin is a peer-to-peer cryptocurrency that aims to function as a means of exchange and is independent of any central authority. Bitcoins are transferred electronically in a secure, verifiable, and immutable way.
  • Network validators, whom are often referred to as miners, participate in the SHA-256d-based Proof-of-Work consensus mechanism to determine the next global state of the blockchain.
  • The Bitcoin protocol has a target block time of 10 minutes, and a maximum supply of 21 million tokens. The only way new bitcoins can be produced is when a block producer generates a new valid block.
  • The protocol has a token emission rate that halves every 210,000 blocks, or approximately every 4 years.
  • Unlike public blockchain infrastructures supporting the development of decentralized applications (Ethereum), the Bitcoin protocol is primarily used only for payments, and has only very limited support for smart contract-like functionalities (Bitcoin “Script” is mostly used to create certain conditions before bitcoins are used to be spent).

2. Bitcoin’s core features

For a more beginner’s introduction to Bitcoin, please visit Binance Academy’s guide to Bitcoin.

Unspent Transaction Output (UTXO) model

A UTXO transaction works like cash payment between two parties: Alice gives money to Bob and receives change (i.e., unspent amount). In comparison, blockchains like Ethereum rely on the account model.
https://preview.redd.it/t1j6anf8f3151.png?width=1601&format=png&auto=webp&s=33bd141d8f2136a6f32739c8cdc7aae2e04cbc47

Nakamoto consensus

In the Bitcoin network, anyone can join the network and become a bookkeeping service provider i.e., a validator. All validators are allowed in the race to become the block producer for the next block, yet only the first to complete a computationally heavy task will win. This feature is called Proof of Work (PoW).
The probability of any single validator to finish the task first is equal to the percentage of the total network computation power, or hash power, the validator has. For instance, a validator with 5% of the total network computation power will have a 5% chance of completing the task first, and therefore becoming the next block producer.
Since anyone can join the race, competition is prone to increase. In the early days, Bitcoin mining was mostly done by personal computer CPUs.
As of today, Bitcoin validators, or miners, have opted for dedicated and more powerful devices such as machines based on Application-Specific Integrated Circuit (“ASIC”).
Proof of Work secures the network as block producers must have spent resources external to the network (i.e., money to pay electricity), and can provide proof to other participants that they did so.
With various miners competing for block rewards, it becomes difficult for one single malicious party to gain network majority (defined as more than 51% of the network’s hash power in the Nakamoto consensus mechanism). The ability to rearrange transactions via 51% attacks indicates another feature of the Nakamoto consensus: the finality of transactions is only probabilistic.
Once a block is produced, it is then propagated by the block producer to all other validators to check on the validity of all transactions in that block. The block producer will receive rewards in the network’s native currency (i.e., bitcoin) as all validators approve the block and update their ledgers.

The blockchain

Block production

The Bitcoin protocol utilizes the Merkle tree data structure in order to organize hashes of numerous individual transactions into each block. This concept is named after Ralph Merkle, who patented it in 1979.
With the use of a Merkle tree, though each block might contain thousands of transactions, it will have the ability to combine all of their hashes and condense them into one, allowing efficient and secure verification of this group of transactions. This single hash called is a Merkle root, which is stored in the Block Header of a block. The Block Header also stores other meta information of a block, such as a hash of the previous Block Header, which enables blocks to be associated in a chain-like structure (hence the name “blockchain”).
An illustration of block production in the Bitcoin Protocol is demonstrated below.

https://preview.redd.it/m6texxicf3151.png?width=1591&format=png&auto=webp&s=f4253304912ed8370948b9c524e08fef28f1c78d

Block time and mining difficulty

Block time is the period required to create the next block in a network. As mentioned above, the node who solves the computationally intensive task will be allowed to produce the next block. Therefore, block time is directly correlated to the amount of time it takes for a node to find a solution to the task. The Bitcoin protocol sets a target block time of 10 minutes, and attempts to achieve this by introducing a variable named mining difficulty.
Mining difficulty refers to how difficult it is for the node to solve the computationally intensive task. If the network sets a high difficulty for the task, while miners have low computational power, which is often referred to as “hashrate”, it would statistically take longer for the nodes to get an answer for the task. If the difficulty is low, but miners have rather strong computational power, statistically, some nodes will be able to solve the task quickly.
Therefore, the 10 minute target block time is achieved by constantly and automatically adjusting the mining difficulty according to how much computational power there is amongst the nodes. The average block time of the network is evaluated after a certain number of blocks, and if it is greater than the expected block time, the difficulty level will decrease; if it is less than the expected block time, the difficulty level will increase.

What are orphan blocks?

In a PoW blockchain network, if the block time is too low, it would increase the likelihood of nodes producingorphan blocks, for which they would receive no reward. Orphan blocks are produced by nodes who solved the task but did not broadcast their results to the whole network the quickest due to network latency.
It takes time for a message to travel through a network, and it is entirely possible for 2 nodes to complete the task and start to broadcast their results to the network at roughly the same time, while one’s messages are received by all other nodes earlier as the node has low latency.
Imagine there is a network latency of 1 minute and a target block time of 2 minutes. A node could solve the task in around 1 minute but his message would take 1 minute to reach the rest of the nodes that are still working on the solution. While his message travels through the network, all the work done by all other nodes during that 1 minute, even if these nodes also complete the task, would go to waste. In this case, 50% of the computational power contributed to the network is wasted.
The percentage of wasted computational power would proportionally decrease if the mining difficulty were higher, as it would statistically take longer for miners to complete the task. In other words, if the mining difficulty, and therefore targeted block time is low, miners with powerful and often centralized mining facilities would get a higher chance of becoming the block producer, while the participation of weaker miners would become in vain. This introduces possible centralization and weakens the overall security of the network.
However, given a limited amount of transactions that can be stored in a block, making the block time too longwould decrease the number of transactions the network can process per second, negatively affecting network scalability.

3. Bitcoin’s additional features

Segregated Witness (SegWit)

Segregated Witness, often abbreviated as SegWit, is a protocol upgrade proposal that went live in August 2017.
SegWit separates witness signatures from transaction-related data. Witness signatures in legacy Bitcoin blocks often take more than 50% of the block size. By removing witness signatures from the transaction block, this protocol upgrade effectively increases the number of transactions that can be stored in a single block, enabling the network to handle more transactions per second. As a result, SegWit increases the scalability of Nakamoto consensus-based blockchain networks like Bitcoin and Litecoin.
SegWit also makes transactions cheaper. Since transaction fees are derived from how much data is being processed by the block producer, the more transactions that can be stored in a 1MB block, the cheaper individual transactions become.
https://preview.redd.it/depya70mf3151.png?width=1601&format=png&auto=webp&s=a6499aa2131fbf347f8ffd812930b2f7d66be48e
The legacy Bitcoin block has a block size limit of 1 megabyte, and any change on the block size would require a network hard-fork. On August 1st 2017, the first hard-fork occurred, leading to the creation of Bitcoin Cash (“BCH”), which introduced an 8 megabyte block size limit.
Conversely, Segregated Witness was a soft-fork: it never changed the transaction block size limit of the network. Instead, it added an extended block with an upper limit of 3 megabytes, which contains solely witness signatures, to the 1 megabyte block that contains only transaction data. This new block type can be processed even by nodes that have not completed the SegWit protocol upgrade.
Furthermore, the separation of witness signatures from transaction data solves the malleability issue with the original Bitcoin protocol. Without Segregated Witness, these signatures could be altered before the block is validated by miners. Indeed, alterations can be done in such a way that if the system does a mathematical check, the signature would still be valid. However, since the values in the signature are changed, the two signatures would create vastly different hash values.
For instance, if a witness signature states “6,” it has a mathematical value of 6, and would create a hash value of 12345. However, if the witness signature were changed to “06”, it would maintain a mathematical value of 6 while creating a (faulty) hash value of 67890.
Since the mathematical values are the same, the altered signature remains a valid signature. This would create a bookkeeping issue, as transactions in Nakamoto consensus-based blockchain networks are documented with these hash values, or transaction IDs. Effectively, one can alter a transaction ID to a new one, and the new ID can still be valid.
This can create many issues, as illustrated in the below example:
  1. Alice sends Bob 1 BTC, and Bob sends Merchant Carol this 1 BTC for some goods.
  2. Bob sends Carols this 1 BTC, while the transaction from Alice to Bob is not yet validated. Carol sees this incoming transaction of 1 BTC to him, and immediately ships goods to B.
  3. At the moment, the transaction from Alice to Bob is still not confirmed by the network, and Bob can change the witness signature, therefore changing this transaction ID from 12345 to 67890.
  4. Now Carol will not receive his 1 BTC, as the network looks for transaction 12345 to ensure that Bob’s wallet balance is valid.
  5. As this particular transaction ID changed from 12345 to 67890, the transaction from Bob to Carol will fail, and Bob will get his goods while still holding his BTC.
With the Segregated Witness upgrade, such instances can not happen again. This is because the witness signatures are moved outside of the transaction block into an extended block, and altering the witness signature won’t affect the transaction ID.
Since the transaction malleability issue is fixed, Segregated Witness also enables the proper functioning of second-layer scalability solutions on the Bitcoin protocol, such as the Lightning Network.

Lightning Network

Lightning Network is a second-layer micropayment solution for scalability.
Specifically, Lightning Network aims to enable near-instant and low-cost payments between merchants and customers that wish to use bitcoins.
Lightning Network was conceptualized in a whitepaper by Joseph Poon and Thaddeus Dryja in 2015. Since then, it has been implemented by multiple companies. The most prominent of them include Blockstream, Lightning Labs, and ACINQ.
A list of curated resources relevant to Lightning Network can be found here.
In the Lightning Network, if a customer wishes to transact with a merchant, both of them need to open a payment channel, which operates off the Bitcoin blockchain (i.e., off-chain vs. on-chain). None of the transaction details from this payment channel are recorded on the blockchain, and only when the channel is closed will the end result of both party’s wallet balances be updated to the blockchain. The blockchain only serves as a settlement layer for Lightning transactions.
Since all transactions done via the payment channel are conducted independently of the Nakamoto consensus, both parties involved in transactions do not need to wait for network confirmation on transactions. Instead, transacting parties would pay transaction fees to Bitcoin miners only when they decide to close the channel.
https://preview.redd.it/cy56icarf3151.png?width=1601&format=png&auto=webp&s=b239a63c6a87ec6cc1b18ce2cbd0355f8831c3a8
One limitation to the Lightning Network is that it requires a person to be online to receive transactions attributing towards him. Another limitation in user experience could be that one needs to lock up some funds every time he wishes to open a payment channel, and is only able to use that fund within the channel.
However, this does not mean he needs to create new channels every time he wishes to transact with a different person on the Lightning Network. If Alice wants to send money to Carol, but they do not have a payment channel open, they can ask Bob, who has payment channels open to both Alice and Carol, to help make that transaction. Alice will be able to send funds to Bob, and Bob to Carol. Hence, the number of “payment hubs” (i.e., Bob in the previous example) correlates with both the convenience and the usability of the Lightning Network for real-world applications.

Schnorr Signature upgrade proposal

Elliptic Curve Digital Signature Algorithm (“ECDSA”) signatures are used to sign transactions on the Bitcoin blockchain.
https://preview.redd.it/hjeqe4l7g3151.png?width=1601&format=png&auto=webp&s=8014fb08fe62ac4d91645499bc0c7e1c04c5d7c4
However, many developers now advocate for replacing ECDSA with Schnorr Signature. Once Schnorr Signatures are implemented, multiple parties can collaborate in producing a signature that is valid for the sum of their public keys.
This would primarily be beneficial for network scalability. When multiple addresses were to conduct transactions to a single address, each transaction would require their own signature. With Schnorr Signature, all these signatures would be combined into one. As a result, the network would be able to store more transactions in a single block.
https://preview.redd.it/axg3wayag3151.png?width=1601&format=png&auto=webp&s=93d958fa6b0e623caa82ca71fe457b4daa88c71e
The reduced size in signatures implies a reduced cost on transaction fees. The group of senders can split the transaction fees for that one group signature, instead of paying for one personal signature individually.
Schnorr Signature also improves network privacy and token fungibility. A third-party observer will not be able to detect if a user is sending a multi-signature transaction, since the signature will be in the same format as a single-signature transaction.

4. Economics and supply distribution

The Bitcoin protocol utilizes the Nakamoto consensus, and nodes validate blocks via Proof-of-Work mining. The bitcoin token was not pre-mined, and has a maximum supply of 21 million. The initial reward for a block was 50 BTC per block. Block mining rewards halve every 210,000 blocks. Since the average time for block production on the blockchain is 10 minutes, it implies that the block reward halving events will approximately take place every 4 years.
As of May 12th 2020, the block mining rewards are 6.25 BTC per block. Transaction fees also represent a minor revenue stream for miners.
submitted by D-platform to u/D-platform [link] [comments]

03-27 13:34 - 'AiOption (AiOption) receives tens of millions of dollars in financing to help the blockchain empower the financial industry' (self.Bitcoin) by /u/jackzhang0 removed from /r/Bitcoin within 3-13min

'''
In 2020, due to the dual impact of the coronary pneumonia epidemic and the plunge of US oil stocks, the economic situation in the Asia-Pacific region is very grim. Within a week, U.S. stocks melted twice, and crypto digital assets such as Bitcoin plummeted. This seems to indicate that the direction of global financial markets in 2020 will be extremely unstable. In this situation, traditional financial investment methods are not the most valuable means of financial management. AiOption Blockchain Binary Options Platform provides a new direction for financial investment, predicting the rise and fall of encrypted digital assets such as Bitcoin in a fixed period of time to obtain income.
Recently, AiOption, a professional blockchain binary options platform, announced that it has received tens of millions of dollars in financing. This round of financing was led by the Japanese consortium and the Thai royal family. This round of financing is an important milestone in the continuous increase of market competitiveness. At the same time, AiOption has become the largest platform in China to provide blockchain binary options transactions.

[link]1
This round of financing will help the platform to further strengthen the innovation and research and development of original key core technologies, consolidate the company's leading edge in the binary options industry of the blockchain, and help the company continue to expand more application scenarios and accelerate the blockchain's empowerment of the financial industry. In order to further improve the product experience, we will also introduce local special versions based on user habits in different countries and regions. As soon as it entered the promotion in the Asia-Pacific region in 2020, there were more than 100,000 registered users in the first week, achieving very good results. The platform will also launch more promotion activities in combination with local characteristics. The top investment groups such as the Thai Royal Family and the Japanese Consortium gave AiOption a high rating. It is indeed a black technology star product known as Israeli fintech innovation.
AiOption (AiOption) is a professional crypto asset options trading platform with a solid foundation of blockchain technology. It has achieved significant R & D results in distributed network and blockchain security. It has worked closely with more than 8 countries to provide a very simple way to predict the price fluctuations of encrypted digital assets such as Bitcoin and Ethereum. The platform collects price data of multiple trading symbols from multiple selected trusted data sources (such as Binance, coinbase, bittrex, huobi, and some other well-known global exchanges) to merge together, and uses intelligent algorithms to identify and Filter abnormal price data and calculate the final price index for a single coin. Use more innovative and fair ways for players to predict the price of crypto digital assets such as Bitcoin and Ethereum.

[link]2
Safe, efficient, and high-performance systems
AiOption has top risk control, anti-fraud and segregated witness technologies, comprehensively formulates a security policy system, multi-level risk identification control, and multiple security defense methods. The high-frequency transaction matching engine steadily supports large amounts of data, high performance, and high concurrency. It adopts a distributed architecture, and the market and deep data come online at a fast speed. The front-end adopts a firewall anti-attack mechanism and the back-end adopts a hidden and discrete deployment.
AiOption's binary options trading system is equipped with flexible and convenient trading modes and an extremely secure system to ensure the safety of user assets.
Fair and simple, simple and convenient transaction model
On a general options platform, the bet price is real-time Bitcoin price and can be easily manipulated by the platform. When the player wagers the Bitcoin price on the platform, the wager price is the initial Bitcoin price for each round of the game, and manipulation is not allowed! Ensure fair and fair transactions, convenient user transactions, and easy to master gameplay.
  1. The operation is simple. You only need to judge the rise and fall of encrypted digital assets after 90 seconds.
  2. The rate of return is fast, and the single-round profit can be settled in 90 seconds.
  3. Transaction time is unlimited, 90 seconds matching, non-stop trading 7 days and 24 hours.
  4. There is no handling fee, and no dealer control disk.
At the same time, the platform has a unique function of depositing money and managing money. By depositing a certain amount of USDT, excellent players and excellent teams can obtain fixed high returns, with a maximum return of four times!
For many years, AIoption has always adhered to the concept of blockchain technology to empower the financial industry, and has concentrated on polishing products and application scenarios. The top-level blockchain team has achieved certain results in the blockchain and financial fields.
Through this financing, we will continue to focus on the development of blockchain technology and continue to develop in the large field of blockchain binary options services. AiOption's vision is to promote the development of blockchain binary options services, provide customers with better services, and continue to maintain its leading position in the domestic blockchain binary options industry.
'''
AiOption (AiOption) receives tens of millions of dollars in financing to help the blockchain empower the financial industry
Go1dfish undelete link
unreddit undelete link
Author: jackzhang0
1: pr*vi*w.redd.i*/0*i**tuut7p41.png*w***h=6*8&*mp;for*at*png&****=web*&*s*9387b*0a4b5b1*b8*165*517*9*5*bdb*a5e1a*b 2: preview.redd.it*vgy*zpd4u*p41*pn***i**h=769&format=pn*&am*;***o=w*bp&***;s=b69***7339239*967622***bccea*c5*07b*55**
Unknown links are censored to prevent spreading illicit content.
submitted by removalbot to removalbot [link] [comments]

Day 5: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. User demand from this community can help lead to some big changes. Have you joined the /r/Bitcoin SegWit effort?

SUMMARY
Segregrated Witness (SegWit) was activated on the Bitcoin network August 24, 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work. If users demand SegWit now it will temporarily releive the transaction backlog while bigger solutions like Lightning are developed.
TODAY's NEWS/DEVELOPMENTS/VICTORIES
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY SEGWIT & BATCHING STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready ?
Bitonic Ready ? Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Ready Yes
LocalBitcoins Ready ?
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Source 1
Source 2
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
Edit: Bitonic batching status updated to 'Yes'
submitted by Bastiat to Bitcoin [link] [comments]

Day 9: I will post this guide regularly until available solutions like SegWit, order batching, and Lightning payment channels are mass adopted, the mempool is empty once again, and tx fees are low. Have you done your part?

BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that this is an important data point that indicates if just a few major exchanges would deploy SegWit the high fees bitcoin is experiencing would be eliminated.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download the latest version of Electrum to generate a SegWit address.
A transaction between two SegWit addresses is a SegWit transaction.
A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
Using Electrum, the "Tools" menu option: "Pay to many".
Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
Draw your own conclusions based on their own words:
March 2016 - Coinbase CEO Brian Armstrong has reservations about Core
Dec 2017 - Coinbase is STILL working on Segwit
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to exist wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
P2SH starts with "3..."
bech32 starts with "bc1..."
Which addresses can I send from/to?
P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backward compatibility
bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 8: I will post this guide regularly until available solutions like SegWit, order batching, and Lightning payment channels are mass adopted, the mempool is empty once again, and tx fees are low. BTC Core SegWit GUI coming May 1, Coinbase incompetence exposed, more exchanges deploy SegWit

BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that the high fees bitcoin is experiencing could be easily addressed and need not exist.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download the latest version of Electrum to generate a SegWit address.
A transaction between two SegWit addresses is a SegWit transaction.
A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
Using Electrum, the "Tools" menu option: "Pay to many".
Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
Draw your own conclusions based on their own words:
March 2016 - Coinbase CEO Brian Armstrong has reservations about Core
Dec 2017 - Coinbase is STILL working on Segwit
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to exist wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
P2SH starts with "3..."
bech32 starts with "bc1..."
Which addresses can I send from/to?
P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backward compatibility
bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 7: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Do you want low tx fees, because this is how you get low tx fees

TL/DR
Bitcoin users can help lower transaction fees and improve bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to existing wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
    Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
    Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
  • P2SH starts with "3..."
    bech32 starts with "bc1..."
Which addresses can I send from/to?
  • P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backwards compatibility
    bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
    Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
  • The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Day 6: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Refer a friend to SegWit today. There's no $10 referral offer, but you'll both get lower fees and help strengthen the BTC protocol

TL/DR
Bitcoin users can help lower transaction fees and contribute to bitcoin by switching to SegWit addresses and encourage wallets/exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India have already implemented SegWit and are reaping the benefits of reduced transaction fees. If bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all bitcoin users to individually contribute to help strengthen and improve the bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
A few thousand bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Conact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Ready Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
  • Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.3 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    Source: HowToToken
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to existing wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
    Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
    Source: BTCManager.com
What is the difference in address format between SegWit address formats P2SH and bech32?
  • P2SH starts with "3..."
    bech32 starts with "bc1..."
Which addresses can I send from/to?
  • P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backwards compatibility
    bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
    Source: BitcoinTalk.org
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
  • The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
submitted by Bastiat to Bitcoin [link] [comments]

Groestlcoin Release September 2018

Introduction

As always, the past 3 months since 22nd June have been crazy busy. The bears might still be around, but the show must go on and of course has not slowed the Groestlcoin development team in the slightest. Here’s a quick overview of what has already happened since the last release: - Integrated into the bitbns exchange, with the ability to buy Groestlcoin directly with the Indian Rupee. - Groestlcoin Rebrand Vote – Whilst there was much talk and push for a rebrand vote, the overall result was almost unanimously in favour of keeping our unique and conversation-starting name. With just 83 votes to Rebrand, and 2577 votes to No Rebrand. Thank you for all who voted, the funds raised are being used to fund ongoing hosting and development costs. - Integrated into the Cryptobridge exchange. Cryptobridge is a popular decentralised exchange where you always hold the private keys to your funds, only YOU have access to them. - Groestlcoin has been added to SimpleSwap – Groestlcoin can now be swapped with over 100 other cryptocurrencies, without signing up! - Groestlcoin has been added to UnoDax, one of the leading cryptocurrency exchanges in India, with TUSD, BTC and INR trading pairs. - Groestlcoin has been added to SwapLab.cc, where you can buy Groestlcoin using Bitcoin and over 50 other altcoins. Purchasing with VISA/Mastercard is coming VERY SOON. Discussed later: - Groestlcoin has been listed on #3 largest exchange in the world on volume, Huobi Global! More on this to come further on in the announcements. - Groestlcoin has been added to the Guarda Multi-Currency Wallet. - Groestlcoin has been added to Melis Multi-Device, Multi-Account, Multi-Platform, Multi-Signature advanced wallet! Already this list is far more than most other cryptocurrencies have achieved in the past 3 months. But this is just the tip of the iceberg of what has been developed.

What's been Happening?

GRSPay Released

We are so excited for this, that it has it's own separate reddit thread. Head over there now at https://www.reddit.com/groestlcoin/comments/9ikr5m/groestlcoin_releases_grspay/? to see more on this!
https://www.melis.io/assets/logo-navbar-4b6f0d372f15b2446d3fa4c68f346e4fb08ee113941186cee58fd6135f3f8b7d.svg

Melis Wallet

The the most advanced wallet for Bitcoin, Bitcoin Cash, Litecoin and now Groestlcoin.
With Melis you have the complete control of your bitcoins and private keys, you can define spending limits policies and make use of two or more factors authentication. Melis is open source, published on GitHub.

How Melis Works?

You can create as many accounts as you want. An account is a part of your wallet that can be customised to your requirements. You can choose how many co-signers are required to spend funds. The accounts are completely independent and act like separate wallets from each other but can be accessed via the same details. A core feature of Melis is the ability to set a ‘primary’ device. With this you can set an account as ‘Secure’ so it is only viewable (and accessible at all) from the Primary device. You can have a savings account hidden from the outside world whilst also having your ‘spending’ funds available on the go. With Melis you can create a multi-signature account between N people, where up to N signatures are required to sign a transaction, choosing if any of those should be mandatory.
Core Features:
https://guarda.co/assets/images/1PGo4ID.svg?1537791124643

Guarda Wallet

Safer than ever! Desktop Light Wallet - Anonymous and fast!
With Guarda Multi-currency Desktop Light Wallet you don’t need to register. Guarda has no access to your private keys or funds. You can receive, send, store, buy and exchange cryptocurrencies in complete anonymity and safety. All these features are available on Linux, Windows or MacOS. Choose the one that suits you!
More info about Guarda wallet on www.guarda.co
https://holytransaction.com/images/logo.png

Integrated into HolyTransaction

What is HolyTransaction?

HolyTransaction gives users access to the crypto world with a universal cryptocurrency wallet and instant exchange.

Features

For more information, visit Holy Transaction here.
https://www.groestlcoin.org/wp-content/uploads/2018/09/next-grs-groestlcoin.jpg

Integrated into NEXT Wallet

What is NEXT?

NEXT is a modern, next-generation stylish open-source Desktop wallet.

Features

For more information, visit NextWallet here.
https://blockchainfinancial.com/mediaserve2018/09/admin-06143647-bcf_logo_vec_256x256.png

Integrated into Blockchain Financial

What is Blockchain Financial?

Blockchain Financial is a set of web based services for individuals and companies that want to make things happen with the Cryptocurrencies Ecosystem. - For those that don't know anything about cryptocurrencies, we offer tools that will let them receive, send and operate with an assortment of coins. - For those that are already riding the wave, we offer tools that will let them do all those things that they weren't able to do.

Blockchain Financials mission

We're not here to reinvent the wheel. We're here to make it run smoother for you, and we provide some of the most useful services you'll find on the internet, made in a way that is easy to understand and use on a daily basis. In short, we're a bunch of people that claim to be Crypto Evangelists. We strongly believe in cryptocurrencies, and our main promise is to push them up so more people get involved and take all the advantages they offer.

More information from Blockchain Financial

Back in 2014, the world was taken by storm when Facebook approved the first cryptocurrencies tipping apps. The first was for Dogecoin, and the second was for multiple coins.
The project was hosted on whitepuma.net, and persisted for almost two years, built up a massive user community and gave a home to Bitcoin, Litecoin, Dogecoin and dozens of other bitcoin-based altcoins.
After very active months, the tipping hype started to fade away. Then, the developers decided to jump into the next stage: bringing not only tipping, but also mining and a widget that could be embedded on websites to allow everyone to accept payments. Sadly, the work was never completed because the project started to require an unsustainable amount of resources. Then, in a painful decision, a shutdown was announced by December 2015.
A couple of months after whitepuma.net was closed, the source code was released by its creator as Open Source on GitHub. But it wasn't maintained.
Now, some of the original members of the dev and admin teams gathered up with a handful of the WhitePuma's elite users, and decided to make something good with the best pieces of the old source code. That, with fresh new ideas and the power of the BardCanvas engine, synthesized the core of Blockchain Financial.
More info about Blockchain Financial wallet on .
For more information, visit [Blockchain Financial](www.blockchainfinancial.com)
https://www.huobi.com/image/logo.aeb4723.svg

Groestlcoin Listed on Huobi

Who are Huobi?

Huobi was founded in China and is now based in Singapore, with offices in Hong Kong, South Korea, Japan and the North America, currently sitting #3 in volume on Coinmarketcap. Huobi is a great leap forward for our growing presence in Asia and we are very excited to be listed here!
You can find the official Huobi announcement here.

Groestlcoin Core v2.16.3 - Please Update ASAP

A new major Groestlcoin Core version 2.16.3 is now available for download which includes both a Denial of Service component and a critical inflation vulnerability, so it is recommended to upgrade to it if you are running a full Groestlcoin node or a local Groestlcoin Core wallet.
v2.16.3 is now the official release version of Groestlcoin Core. This is a new major version release with a very important security updates. It is recommended to upgrade to this version as soon as possible. Please stop running versions of Groestlcoin Core affected by CVE-2018-17144 ASAP: These are 2.13.3 and 2.16.0.
As a result in this, all exchanges and services have been asked to upgrade to this version, so please be patient if wallets go in to maintenance mode on these services.

What's new in version v2.16.3?

This is a major release of Groestlcoin Core fixing a Denial of Service component and a critical inflation vulnerability (https://nvd.nist.gov/vuln/detail/CVE-2018-17144) exploitable by miners that has been discovered in Groestlcoin Core version 2.13.3 and 2.16.0. It is recommended to upgrade to 2.16.3 as soon as possible. If you only occasionally run Groestlcoin Core, then it's not necessary to run out and upgrade it right this second. However, you should upgrade it before you next run it. If you know anyone who is running an older version, tell them to upgrade it ASAP. Stored funds are not at risk, and never were at risk. At this time we believe over half of the Groestlcoin hashrate has upgraded to patched nodes. We are unaware of any attempts to exploit this vulnerability. However, it still remains critical that affected users upgrade and apply the latest patches to ensure no possibility of large reorganizations, mining of invalid blocks, or acceptance of invalid transactions occurs.

The Technicals

In Groestlcoin Core 2.13.3, an optimization was added (Bitcoin Core PR #9049) which avoided a costly check during initial pre-relay block validation that multiple inputs within a single transaction did not spend the same input twice which was added in 2012 (Bitcoin Core PR #443). While the UTXO-updating logic has sufficient knowledge to check that such a condition is not violated in 2.13.3 it only did so in a sanity check assertion and not with full error handling (it did, however, fully handle this case twice in prior to 2.1.0.6). Thus, in Groestlcoin Core 2.13.3, any attempts to double-spend a transaction output within a single transaction inside of a block will result in an assertion failure and a crash, as was originally reported. In Groestlcoin Core 2.16.0, as a part of a larger redesign to simplify unspent transaction output tracking and correct a resource exhaustion attack the assertion was changed subtly. Instead of asserting that the output being marked spent was previously unspent, it only asserts that it exists. Thus, in Groestlcoin Core 2.16.0, any attempts to double-spend a transaction output within a single transaction inside of a block where the output being spent was created in the same block, the same assertion failure will occur. However, if the output being double-spent was created in a previous block, an entry will still remain in the CCoin map with the DIRTY flag set and having been marked as spent, resulting in no such assertion. This could allow a miner to inflate the supply of Groestlcoin as they would be then able to claim the value being spent twice.
Groestlcoin would like to publicly thank Reddit user u/Awemany for finding CVE-2018-17144 and reporting it (https://lists.linuxfoundation.org/pipermail/bitcoin-core-dev/2018-Septembe000064.html). You deserve gratitude and appreciation from cryptoworld, and you have ours. If you want to support him for his work, please consider donating to him on his bitcoin cash address: bitcoincash:qr5yuq3q40u7mxwqz6xvamkfj8tg45wyus7fhqzug5
http://i.imgur.com/3YhyNZK.png

Groestlcoin Electrum-GRS 3.2.2 - Ledger & Trezor Edition

What is Electrum-GRS?
Electrum-GRS is a lightweight "thin client" groestlcoin wallet Windows, MacOS and Linux based on a client-server protocol. Its main advantages over the original Groestlcoin client include support for multi-signature wallets and not requiring the download of the entire block chain.

Changes:

http://i.imgur.com/3YhyNZK.png

Electrum-GRS Mobile Android

What is Electrum-GRS Mobile?

Electrum-grs is a lightweight "thin client" groestlcoin wallet Android based on a client-server protocol. Its main advantages over the original Groestlcoin client include support for multi-signature wallets and not requiring the download of the entire block chain.

Changes

Groestlcoin EasyVanity Released

Groestlcoin EasyVanity is a Windows app is built from the ground-up in C# and makes it easier than ever before to create your very own bespoke Groestlcoin address(es), even whilst not connected to the internet! You can even generate multiple keys with the same prefix and leave it on overnight whilst your CPU or GPU collects and stores these addresses locally.
If you're tired of the random, cryptic addresses generated by regular groestlcoin clients, then Groestlcoin EasyVanity is the right choice for you to create a more personalized address.

Features

• Ability to continue finding keys after first one is found • Includes warning on startup if connected to the internet • Ability to output keys to a text file (And shows button to open that directory) • Ability to make your match case sensitive (Where possible) • Show and hide the private key with a simple toggle switch, and copy the private key straight to your clipboard • Show full output of commands • Includes statistics whilst the application is running • Ability to choose between Processor (CPU) and Graphics Card (GPU) • Automatically detects 32 or 64 bit systems • Features both a Light and Dark Material Design inspired Themes • EasyVanity's search is probabilistic, and the amount of time required to find a given pattern depends on how complex the pattern is, the speed of your computer, and whether you get lucky. • EasyVanity includes components to perform address searching on your CPU (vanitygen) and your OpenCL-compatible GPU (oclvanitygen). Both can be built from source, and both are included in the Windows binary package. • Prefixes are exact strings that must appear at the beginning of the address. When searching for prefixes, Easyvanity will ensure that the prefix is possible, and will provide a difficulty estimate. • The percentage displayed just shows how probable it is that a match would be found in the session so far. If it finds your address with 5% on the display, you are extremely lucky. If it finds your address with 92% on the display, you are unlucky. If you stop EasyVanity with 90% on the display, restart it, and it finds your address with 2% on the display, your first session was unlucky, but your second session was lucky. • EasyVanity uses the OpenSSL random number generator. This is the same RNG used by groestlcoin and a good number of HTTPS servers. It is regarded as well-scrutinized. Guessing the private key of an address found by EasyVanity will be no easier than guessing a private key created by groestlcoin itself. • To speed up address generation, EasyVanity uses the RNG to choose a private key, and literally increments the private key in a loop searching for a match. As long as the starting point is not disclosed, if a match is found, the private key will not be any easier to guess than if every private key tested were taken from the RNG. EasyVanity will also reload the private key from the RNG after 10,000,000 unsuccessful searches (100M for oclvanitygen), or when a match is found and multiple patterns are being searched for. • Free software - MIT. Anyone can audit the code. • Written in C# - The code is short, and easy to review.

Groestlcoin Sentinel (Android & Blackberry) – Mainnet + Testnet

What is Sentinel?

Groestlcoin Sentinel is the easiest and fastest way to track/receive/watch payments in your offline Groestlcoin Wallets. Groestlcoin Sentinel is compatible with any standard Groestlcoin address, BIP44 XPUB (Extended Public Key) BIP49 YPUB and BIP84 ZPUB
Groestlcoin Sentinel is a great solution for anyone who wants the convenience and utility of a hot wallet for receiving payments directly into their cold storage (or hardware wallets). Sentinel accepts XPUB's, YPUB'S, ZPUB's and individual Groestlcoin address. Once added you will be able to view balances, view transactions, and (in the case of XPUB's, YPUB's and ZPUB's) deterministically generate addresses for that particular wallet.

What's New?

The P2SH paperwallet supports creating P2SH paperwallets in bulk, keypair generation with QR codes and sweeping tool. Groestlcoin believes strongly in privacy, the live version does not collect and store IP or transaction data.
Changes
Features
The BECH32 paperwallet supports creating BECH32 paperwallets in bulk, keypair generation with QR codes and sweeping tool. Groestlcoin believes strongly in privacy, the live version does not collect and store IP or transaction data.
Features
![WebWallet](https://i.imgur.com/Z2oj7bj.png)

Groestlcoin Web Wallet Update 1.4

What is Groestlcoin Web Wallet?
Groestlcoin Webwallet is an open source, multisignature, HD Wallet and more! Webwallet is a a open source browser based Groestlcoin webwallet.
Webwallet is a playground for Groestlcoin in javascript to experiment with. It supports multisig, OP_HODL, RBF and many more. Groestlcoin believes strongly in privacy, the live version does not collect and store IP or transaction data.
Changes:
submitted by Yokomoko_Saleen to groestlcoin [link] [comments]

[uncensored-r/Bitcoin] Day 9: I will post this guide regularly until available solutions like SegWit, order batching, an...

The following post by Bastiat is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7rrb3w
The original post's content was as follows:
BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that this is an important data point that indicates if just a few major exchanges would deploy SegWit the high fees bitcoin is experiencing would be eliminated.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
...
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

[uncensored-r/Bitcoin] Day 8: I will post this guide regularly until available solutions like SegWit, order batching, an...

The following post by Bastiat is being replicated because some comments within the post(but not the post itself) have been silently removed.
The original post can be found(in censored form) at this link:
np.reddit.com/ Bitcoin/comments/7q44av
The original post's content was as follows:
BACKGROUND
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous bitcoin transactions (Understanding Segregated Witness). Since that time wallets and exchanges have been slow to deploy SegWit, and the majority of users have not made the switch themselves.
On Dec 18 2017 Subhan Nadeem has pointed out that: If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 138,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again.
Mass SegWit use alone could empty the mempool, result in blocks that are not completely full, and make it possible to include transactions with $0 fee once again.
On Jan 11 2018 when BTC sends went offline at Coinbase the mempool began to rapidly empty. Later in the day when service was restored there was a sharp spike up in the mempool. Subsequently, that afternoon Brian Armstrong finally had to break his silence on the topic and admitted Coinbase is working on SegWit but has still not deployed it. It appears that the high fees bitcoin is experiencing could be easily addressed and need not exist.
SegWit is just one technique available to exchanges and users to reduce pressure on the Bitcoin network. You can make the switch to SegWit on your next transaction, and pressure exchanges to deploy SegWit NOW along with other actions that will reduce their transaction impact on the network. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. If your wallet is not committed to implementing SegWit fast, speak out online any way you can and turn up the pressure. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing bitcoin through non-SegWit ready exchanges that are harming bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use bitcoin, explain the benefits of SegWit to everyone, and request they make the switch. Use social media to point out the benefits of SegWit adoption.
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your bitcoins to a SegWit address or SegWit friendly exchange.
BEYOND SEGWIT - BATCHING, PAYMENT CHANNELS, LIGHTNING
Batching is another great way that exchanges can reduce their fees. See: Saving up to 80% on Bitcoin transaction fees by batching payments. Despite the benefits of batching, some exchanges have been slow to implement it. Users should demand this or walk.
Beyond SegWit & Batching, Lightning Network integration will have even more effect. Lightning is now active and exchanges could setup payment channels between each other so that on-chain transactions need not take place. Some ideas have to outline how that might work are here: Google Doc - Lightning Exchanges. Which two bitcoin exchanges will be the first to establish a lightning channel between themselves and offer free/instant transfers between them for their customers? This will happen in 2018
MEMPOOL/SEGWIT STATISTICS
NEWS/DEVELOPMENTS/VICTORIES
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
Source 1: BitcoinCore.org
Source 2: /Bitcoin
Official statements from exchanges:
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unnecessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines bitcoin transaction fees, to begin with?
Fees are charged per byte of data and are bid up by users. Miners will typically include t...
submitted by censorship_notifier to noncensored_bitcoin [link] [comments]

01-11 07:03 - 'Day 9: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and TX fees are low. Do you want low TX fees? This is how...' (self.Bitcoin) by /u/Darknicks removed from /r/Bitcoin within 293-303min

'''
Since Bastiat didn't post this today, I would like to post it again because it's necessary.
TL/DR
Bitcoin users can help lower transaction fees and improve Bitcoin by switching to SegWit addresses and encourage wallets and exchanges to do the same.
SUMMARY
Segregated Witness (SegWit) was activated on the Bitcoin network August 24 2017 as a soft fork that is backward compatible with previous Bitcoin transactions ([Understanding Segregated Witness]1 ). Since that time wallets and exchanges have been slow to deploy SegWit, some admitting in December 2017 that they have not even started work on integrating it. Others, such as Zebpay in India [have already implemented SegWit]2 and are reaping the benefits of reduced transaction fees. If Bitcoin users demand SegWit now it will temporarily relieve the transaction backlog while more even more advanced solutions such as Lightning are developed.
Batching is another great way that exchanges can reduce their fees. See: [Saving up to 80% on Bitcoin transaction fees by batching payments]3 . Despite the benefits of batching, some exchanges have been slow to implement it.
There is an opportunity now for all Bitcoin users to individually contribute to help strengthen and improve the Bitcoin protocol. At this point, the process requires a bit of work/learning on the part of the user, but in doing so you'll actually be advancing Bitcoin and leaving what could turn out to be a multi-generational legacy for humanity.
MEMPOOL/SEGWIT STATISTICS
BACKGROUND
On Dec 18 Subhan Nadeem has pointed out that:
[If every transaction in the Bitcoin network was a SegWit transaction today, blocks would contain up to 8,000 transactions, and the 180,000 unconfirmed transaction backlog would disappear instantly. Transaction fees would be almost non-existent once again]7 .
A few thousand Bitcoin users from /Bitcoin switching to making their next transactions SegWit transactions will help take pressure off the network now, and together we can encourage exchanges/wallets to rapidly deploy SegWit for everyone ASAP. Let's make 80%+ SegWit happen fast. You can help by taking one or more of the action steps below.
ACTION STEPS
  1. If your favorite wallet has not yet implemented SegWit, kindly ask them to do so immediately. In the meantime start using a wallet that has already implemented SegWit.
  2. If your favorite exchange has not yet implemented SegWit, try to avoid making any further purchases of Bitcoin at that exchange and politely inform them that if they do not enable SegWit within 30-days they will lose your business. Sign-up for an account at a SegWit deployed/ready exchange now and initiate the verification process so you'll be ready to bail
  3. Help educate newcomers to Bitcoin about the transaction issue, steer them towards SegWit wallets from day one, and encourage them to avoid ever purchasing Bitcoin through non-SegWit ready exchanges that are harming Bitcoin.
  4. Spread the word! Contact individuals, websites, etc that use Bitcoin, explain the benefits of SegWit to everyone, and request they make the switch
IMPORTANT NOTE: The mempool is currently still quite backlogged. If you are a long-term holder and really have no reason to move your Bitcoins at this time, wait until the mempool starts to clear and transaction fees go down before moving your Bitcoins to a SegWit address or SegWit friendly exchange.
SELECTED TOP EXCHANGES BY BATCHING & SEGWIT STATUS
Exchange Segwit Status Batching Status
Binance NOT READY Yes
Bitfinex Ready Yes
Bitonic Ready Yes
Bitstamp Deployed Yes
Bittrex ? Yes
Coinbase/GDAX NOT READY No
Gemini Ready No
HitBTC Deployed Yes
Huboi ? ?
Kraken Deployed Yes
LocalBitcoins Deployed Yes
OKEx ? ?
Poloniex ? Yes
QuadrigaCX Deployed Yes
Shapeshift Deployed No
Note: all exchanges that have deployed SegWit are currently only sending to p2sh SegWit addresses for now. No exchange will send to a bech32 address like the ones that Electrum generates
[Source 1: BitcoinCore.org]8
[Source 2: /Bitcoin]9
Official statements from exchanges:
  • Bitonic: [SegWit: In testing (including send from bech32). Batching: Have been for years. ]10
  • Kraken: [Deposits are made to Segwit addresses and withdrawls are sent in Segwit format, but frontend presentation is pending full implementation/support in wallets such as bitcoin core.]11
  • Shapeshift: [We don't order batch, but we will get to it. So much engineering to do :/]12
SELECTED WALLETS THAT HAVE SEGWIT ALREADY
Make sure you have a SegWit capable wallet installed and ready to use for your next bitcoin transaction
SegWit Enabled Wallets Wallet Type
Ledger Nano S Hardware
Trezor Hardware
Electrum Desktop
Armory Desktop
Edge iOS
GreenAddress iOS
BitWallet iOS
Samourai Android
GreenBits Android
Electrum Android
SegWitAddress.org Paper
FAQs
Where can I get a fee estimate for a SegWit transaction?
  • [Here's a good website that could help.]13
How can I get a SegWit address from my Bitcoin Core wallet?
  • Currently, Bitcoin Core hasn't implemented a way to get a SegWit address using the GUI. But you can get a receiving SegWit address using the debug console. To do it, go to the "Receive" tab and copy a receiving address (it starts with 1). Then just click Help > Debug window > Console and type: addwitnessaddress addr
  • You should replace addr with the receiving address that you just copied. Tap enter and you'll get an address (starts with 3). This is your SegWit address. You can use this one to receive funds. When you spend from this address, it will be a SegWit transaction. Easy huh?
If I'm a HODLer, will it help to send my BTC to a SegWit address now?
  • No, just get ready now so that your NEXT transaction will be to a SegWit wallet. Avoid burdening the network with any unneccessary transactions for now.
Why is SegWit adoption going so slowly? Is it a time-consuming process, is there risk involved, is it laziness, or something else?
  • SegWit will require some extra work to be done right and securely. Also, most exchanges let the user pay the fee, and up to now users have not been overly concerned about fees so for some exchanges it hasn't been a priority.
Once Segwit is FULLY adopted, what do we see the fees/transaction times going to?
  • Times stay the same - fees will go down. How much and for how long depends on what the demand for transactions will be at that time.
What determines Bitcoin transaction fees, to begin with?
  • Fees are charged per byte of data and are bid up by users. Miners will typically include the transaction with the highest fee/byte first.
Can you please tell me how to move my Bitcoins to SegWit address in Bitcoin core wallet? Does the sender or receiver matter?
  • The Bitcoin core wallet does not yet have a GUI for its SegWit functionality. Download Electrum v3.0.5 to generate a SegWit address.
    A transaction between two SegWit addresses is a SegWit transaction.
    A transaction sent from a SegWit address to a non-SegWit address is a SegWit transaction.
    A transaction sent from a non-SegWit address to a SegWit address is NOT a SegWit transaction. You can send a SegWit Tx if the sending address is a SegWit address.
    [Source: HowToToken]14
What wallet are you using to "batch your sends"? And how can I do that?
  • Using Electrum, the "Tools" menu option: "Pay to many".
    Just enter your receive addresses and the amounts for each, and you can send multiple transactions for nearly the price of one.
Why doesn't the Core Wallet yet support SegWit?
  • The Core Wallet supports SegWit, but its GUI doesn't. The next update will likely have GUI support built-in
Why isn't a large exchange like Coinbase SegWit ready & deployed when much smaller exchanges already are? Why do they default to high fees? Where is the leadership there?
  • Draw your own conclusions based on their own words:
    [March 2016 - Coinbase CEO Brian Armstrong has reservations about Core]15
    [Dec 2017 - Coinbase is STILL working on Segwit]16
P2SH/bech32 FAQs
What are the two SegWit address formats and why do they exist?
  • It's been a challenge for wallet developers to implement SegWit in a way that users can easily and without too much disruption migrate from legacy to SegWit addresses. The first wallets to enable SegWit addresses – Ledger, Trezor, Core, GreenAddress – use so-called “nested P2SH addresses.” This means they take the existing Pay 2 Script Hash address – starting with a “3” – and put a SegWit address into it. This enables a high grade of compatibility to existing wallets as every wallet is familiar with these addresses, but it is a workaround which results in SegWit transactions needing around 10 percent more space than they otherwise would.
    Electrum 3.0 was the first wallet to use bech32 addresses instead of nested p2sh addresses.
    [Source: BTCManager.com]17
What is the difference in address format between SegWit address formats P2SH and bech32?
  • P2SH starts with "3..."
    bech32 starts with "bc1..."
Which addresses can I send from/to?
  • P2SH Segwit addresses can be sent to using older Bitcoin software with no Segwit support. This supports backwards compatibility
    bech32 can only be sent to from newer Bitcoin software that support bech32. Ex: Electrum
    [Source: BitcoinTalk.org]18
Why did ThePirateBay put up two Bitcoin donation addresses on their frontpage, one bech32 and one not?
  • The address starting with a "3..." is a P2SH SegWit address that can be sent BTC from any Bitcoin address including a legacy address. The address starting with a "bc1..." is a bech32 SegWit address that can only be sent to from newer wallets that support bech32.
SEGWIT BLOG GUIDES
  • [HowToToken.com - How To Send Bitcoin Faster And Cheaper Over SegWit Transactions]19
  • [BTCManager.com - Electrum 3.0 is first Wallet to enable Bech32 SegWit Addresses]20
PREVIOUS DAY'S THREADS
There's lots of excellent info in the comments of the previous threads:
  • [Day 1: If every Bitcoin tx was a SegWit tx today, we'd have 8,000 tx blocks & the tx backlog would disappear. Tx fees would be almost non-existent once again. THE NEXT BITCOIN TX YOU MAKE, MAKE IT A SegWit TX. DOWNLOAD A SegWit COMPATIBLE WALLET AND OPEN A SegWit COMPATIBLE EXCHANGE ACCOUNT RIGHT NOW]21
  • [Day 2: I will repost this guide daily until available solutions like Segwit & order batching are adopted, the mempool is empty once again, and transaction fees are low. You can help. Take action today]22
  • [Day 3: ARE YOU PART OF THE SOLUTION? News: Unconfirmed TX's @ 274K, more exchanges adding SegWit, Core prioritizes SegWit GUI]23
  • [Day 4: Unconfirmed TX's @ 174K]24
  • [Day 5: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and transaction fees are low. User demand from this community can help lead to some big changes. Have you joined the /Bitcoin SegWit effort?]25
  • [Day 6: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Refer a friend to SegWit today. There's no $10 referral offer, but you'll both get lower fees and help strengthen the BTC protocol]26
  • [Day 7: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and tx fees are low. Refer a friend to SegWit today. There's no $10 referral offer, but you'll both get lower fees and help strengthen the BTC protocol]27
  • [Day 8: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and TX fees are low. Do you want low TX fees? This is how you get low TX fees]28
Credits to: Bastiat
'''
Day 9: I will post this guide regularly until available solutions like SegWit & order batching are mass adopted, the mempool is empty once again, and TX fees are low. Do you want low TX fees? This is how you get low TX fees
Go1dfish undelete link
unreddit undelete link
Author: Darknicks
1: *he**lletgen*us.co*/*nderstanding-segw*t**egr*g*t*d-witn***/ 2: b**g.z**pay*com*how-zebpa**re*uced-bit*o*n-tr*n*action-fe***a*e24c*88598 3: **tc*inte**tal**com/saving-u**to-80-on-bit*oi*-*ra*sac*io***e*s-b**batching-payments-4*47ab**0*fb 4: https://bitinfocharts.com/comparison/bitcoin-transactionfees.html#3m 5: https://blockchain.info/unconfirmed-transactions 6: se*wit.part**c*a*ts/ 7: *acke**oon*com/b*tcoin**wner**y*u-*eed-to-***the*e-two-t*ings-ri*ht-now-a73122***3*4 8: bitc***core.o***en/seg**t_adoption* 9: https://www.reddit.com/Bitcoin/comments/7kherf/what_exchanges_batch_there_withdrawal_txs_to_save/ 10: https://www.reddit.com/Bitcoin/comments/7mk8az/day_5_i_will_post_this_guide_regularly_until/drv127w/?context=3 11: https://twitter.com/krakenfx/status/949547526847307776 12: https://twitter.com/ErikVoorhees/status/947994430606229504 13: **inb.in/**ees 14: ***tot*ken.com/expl*ined**e*d-bitcoin-fa**er-che*p*r*S*gWit-transa****ns 15: https://blog.coinbase.com/what-happened-at-the-satoshi-roundtable-6c11a10d8cdf 16: https://blog.coinbase.com/bitcoin-segwit-update-3ab0484e4526 17: btcma*age*.*o**elec***m-*-0-firs*-wallet-en*bl*-b**h32-s*gw*t**ddresses/ 18: https://bitcointalk.org/index.php?topic=2347427.msg23976364#msg23976364 19: **wtotok*n.*om/expl*ined/send*bit**i*-fa**er-cheape**Se*Wit-tr*nsa*ti*n*/ 20: b*cm*nag*r.c*m/el***rum*3-0*f*rst-**llet-enabl*-be*h32-*egw*t-*ddresse*/ 21: https://www.reddit.com/Bitcoin/comments/7kyzxn/if_every_bitcoin_tx_was_a_SegWit_tx_today_wed/?utm_content=comments&utm_medium=user&utm_source=reddit&utm_name=frontpage 22: https://www.reddit.com/Bitcoin/comments/7l9tda/day_2_i_will_repost_this_guide_daily_until/ 23: https://www.reddit.com/Bitcoin/comments/7ljpf5/day_3_i_will_repost_this_guide_daily_until/ 24: https://www.reddit.com/Bitcoin/comments/7m6zd0/day_4_i_will_repost_this_guide_daily_until/ 25: https://www.reddit.com/Bitcoin/comments/7mk8az/day_5_i_will_post_this_guide_regularly_until/ 26: https://www.reddit.com/Bitcoin/comments/7na2xb/day_6_i_will_post_this_guide_regularly_until/ 27: https://www.reddit.com/Bitcoin/comments/7ojt5f/day_7_i_will_post_this_guide_regularly_until/ 28: https://www.reddit.com/Bitcoin/comments/7p9b1t/day_8_i_will_post_this_guide_regularly_until/
Unknown links are censored to prevent spreading illicit content.
submitted by removalbot to removalbot [link] [comments]

Ripple XRP HUGE $25 MILLION INVESTMENT! Binance $15 MILLION Agreement! Bitcoin MILESTONE Reached! Binance Vs Ethereum, Bithumb Expansion, The Greatest News Ever & Bitcoin SV Coincidence Ledger (Nano S) Releases Segregated Witness Support - What To Do.  Fast Transaction & Lower Fees Witness BITCOIN HISTORY - LARGEST BULL RUN SOON. India to legalize Cryptocurrency & Sports Betting Coinbase SegWit & Lightning Network Support - Binance to Reopen + Offer 70% Discount on Trading Fees Coinbase and Bitfinex Adding SegWit Support, What it Means for Us. Bitcoin and Litecoin

Segregated Witness oder SegWit ist ein Soft-Work-Protokoll, das die Methode zum Speichern von Daten ändert. Es wurde im Dezember 2015 von Pieter Wiulle als Lösung für Bitcoins Skalierbarkeitsprobleme vorgestellt. Wuille ist Bitcoin Core Developer und Mitbegründer von Bitstream. Erstmals angewendet wurde SegWit von Litecoin am 10. Mai 2017 ... This process is known as Segregated Witness or SegWit. Digital signature accounts for 65% of the space in a given transaction. SegWit attempts to ignore the data attached to a signature by stripping off the signature from within the input and moving it to a structure towards the end of a transaction. This would increase the 1 MB limit for block sizes to a little under 4 MB. In addition to ... Bitcoin löste das Problem mit Segregated Witness (SegWit). Am 23. August 2017 wurde das SegWit-Netzwerk-Upgrade (Segregated Witness) durchgeführt. Es erhöht die Kapazität der Bitcoin-Blockchain erheblich und verbesserte ihre Position gegenüber konkurrierenden Blockchain-Technologien mit hohem Durchsatz. Litecoin And Segregated Witness (SegWit) In May 2017, Litecoin LTC adopted Segregated Witness (also known as SegWit) which is a system that splits transactions in two segments. This made LTC the first cryptocurrency which adopted this system and started removing signatures (the “witness” part) from the original data. This gave LTC a big ... As we know, there’s a myriad of cryptocurrencies out there and each crypto has its own protocol, which is, simply put, a set of rules they must follow. And this is where Segregated Witness (SegWit) comes into play. It’s an optional protocol ... „Segregated Witness“-Transaktionen (SegWit) sind auf dem Vormarsch und haben gerade einen neuen Höchststand erreicht. SegWit-Anwendung nimmt zu. SegWit ist eine Lösung für das Bitcoin-Skalierbarkeitsproblem, die am August 2017 per Soft Fork implementiert wurde. Sie teilt eine Transaktion in zwei Segmente auf, die eine Signatur oder ... Segregated Witness, abgekürzt SegWit, ist ein Lösungsvorschlag für eine Reihe von Problemen in der Bitcoin-Software. SegWit ist ein Update für den Bitcoin Core Quellcode, der seit eh und je vom Bitcoin Kernentwicklerteam betreut wird (Bitcoin Core Team). Der Bitcoin Core Client, oder die Core Node ist zudem die wohl bekannteste und weit verbreiteteste Bitcoin-Software weltweit ...

[index] [10011] [15236] [5026] [4913] [19063] [6997] [1382] [12293] [16007] [22465]

Ripple XRP HUGE $25 MILLION INVESTMENT! Binance $15 MILLION Agreement! Bitcoin MILESTONE Reached!

Get some cryptocurrency merch for affordable prices!: https://cryptoclubclothing.com/ Links to sources featured in the video below: Bitcoin milestone: https:... Ledger Nano S: https://www.ledgerwallet.com/r/ae80 Segregated Witness goo.gl/vfVhzB Join Binance Exchange Here! https://www.binance.com/?ref=13795076 Join Ku... ♨Bitcoin Prediction 2018 in Hindi. 100% Sure Prediction Report.10X Profit in Bitcoin Reading Charts https://goo.gl/Dnw3Qk 📢 BITCOIN & CRYPTOCURRENCY CHARTING TECHNICAL ANALYSIS This video is unavailable. Watch Queue Queue. Watch Queue Queue Queue This video is unavailable. Watch Queue Queue. Watch Queue Coinbase announced this week that it would officially complete the process of integrating Segregated Witness (SegWit) by the end of February. The implementation of the SegWit protocol is expected ...

https://abudabibinaryoption.auto-binaryoption.info